Snohomish County · Licensed roofing contractor
Metal Roof Repair in Bothell
This is home base for our crew, so we see a lot of metal here: standing seam on newer homes off the Canyon Park hills, screw-down panels on shops and barns, and metal over additions on older ramblers. When you call about metal roof repair in Bothell, we start on the roof, not on the phone. We photograph the seams, trim and curbs and give you a written scope before any work is done.
- Up to 30-year manufacturer warranty on qualifying materials
- 5-year workmanship warranty on qualifying labor
-
Certified crew
Manufacturer-trained installation to spec.
-
Licensed & insured
Fully licensed and insured. Verify on L&I
-
5-star rated
Trusted by homeowners across King and Snohomish counties.
The trouble spots we check first
Weather here swings fast, with sun breaks one hour and heavy showers the next. That kind of rain finds a tired ridge closure or a loose screw quickly. We check the high-flow spots first, like valleys, curbs and the trim along the eaves, because that’s where most leaks start. The National Weather Service forecast office forecast is worth a look before a storm; long wind-driven rain is when weak seams show up.
1
Stains near a skylight or chimney
Wet drywall around a skylight well or chimney chase usually means the curb flashing has let go. We check the flashing, the counterflashing and the panels around it. Water coming in now? Call (425) 758-9982 or see 24/7 emergency roof repair.
2
Storm and branch damage
A gust can lift a rake trim or a panel edge, and a limb can crease a seam. We check the damaged area and the panels around it, then lay out repair or replacement in writing.
3
Photos with every quote
We send pictures of what we found and a written scope, so you know what’s being fixed and why.
Jobs our metal crew handles
Here’s what we fix most often on standing seam and screw-down roofs, from a single seam to a whole slope section.
Standing seam seam repair
Open seams closed up, failed clips replaced and joints resealed.
Skylight and curb flashing
New curb flashing around skylights, chimneys and hatches.
Pipe boot and vent box sealing
Fresh boots on plumbing vents and resealed exhaust boxes.
Ridge and valley corrections
Ridge caps, closures and valley metal repaired or replaced.
Storm damage patches
Wind and branch damage fixed, with storm damage roof repair if the storm hit harder.
Fastener and clip replacement
Worn screws and washers swapped out across the panels.
Insurance documentation
A written record with photos, for your files or an HOA.
Pre-sale leak correction
Quick, targeted fixes ahead of a listing or home inspection.
For non-urgent inspections or planned work, see roof inspection & estimate or contact us to schedule at a time that works for you.
How much life is left in your panels
Start with what’s actually wrong. If it’s a handful of fasteners, a curb or one storm-damaged section, we fix it and the roof keeps going. If the underlayment has failed or the decking is soft in several places, new panels usually cost less over time than repeat repairs. We’ll show you what we found and let you decide. Our Washington registration is on the WA Department of Labor & Industries license lookup.
Some metal roof repair in Bothell is a single slope over a porch or addition, with shingles on the rest of the house. When the whole system is near the end of its life, a full metal roof replacement is worth comparing, and we’ll lay out both options side by side. If the rest of the house needs work too, have a look at Brava synthetic shake roofing.
How we work on your roof
Leak trace and photos
We start on the roof, where it’s safe, and photograph every seam, fastener line, curb and trim piece.
Written estimate
Next you get the estimate in writing: the repairs, the materials, the access and the schedule.
Repair and closeout
Once you approve, we make the repair with compatible materials, clean the roof and yard, and send closeout photos.
Warranty details
Qualifying repairs carry a 5-year labor warranty, and eligible materials come with up to 30 years of manufacturer coverage. Your estimate spells out what’s covered before you sign.
5
Year labor warranty
30
Year material warranty
FAQ · Contact us for terms on your project.
Why homeowners choose Construction Elite LLC
- Free inspections & written estimates — clear scope before you approve work
- Master Craftsman certified crew — repairs to manufacturer standards
- Licensed and insured in Washington
- Serving Greater Seattle since 2021 — King, Snohomish, and Pierce Counties
- Written estimates before permanent repair or replacement begins
5-Star Rated on Google
See what our customers say about the work and how we communicate.
Seams and flashing we’ve finished
Recent seam, curb and trim work from our crew.
Service areas close by
Metal roof help is also close by in these cities:
Nearby cities
More metal services
Questions we hear a lot
Can you replace just one damaged panel?
Do you repair the flashing around chimneys and skylights?
Can you fix a dent from a falling branch?
Do you send photos for HOAs or property managers?
Will a repair void my manufacturer warranty?
Are you licensed and insured?
Does the sealant on panel roofs need upkeep?
What causes a ridge cap to leak?
Related roofing services
When it’s more than a few panels, these related services are where most people look next. The metal roofing services hub has the full overview.
Book a roof inspection
Send us a note or give us a call. We’ll inspect the roof, show you the photos and put the repair in writing before anything starts.
Construction Elite LLC · 4405 153rd Pl SE, Bothell, WA 98012