Brava Shake Tile in Kenmore

Brava Shake Tile in Kenmore

Home / Brava Tile Roofing / Shake Brava / Kenmore

King County — Licensed roofing contractor

Brava Shake Tile in Kenmore

Want cedar curb appeal without cedar maintenance on your Kenmore roof? Licensed crews install and repair brava shake tile in Kenmore—cedar-style composite profiles matched to pitch, underlayment, and ridge details.

  • Up to 30-year manufacturer warranty on qualifying materials
  • 5-year workmanship warranty on qualifying labor
  • Certified crew

    Manufacturer-trained installation to spec.

  • Licensed & insured

    Fully licensed and insured. Verify on L&I

  • 5-star rated

    Trusted by homeowners in Kenmore and King County.

When to schedule Brava shake service in Kenmore

Kenmore’s mix of coastal influence near Richmond Beach and inland blocks along the highway corridor creates varied moisture and wind exposure. Evergreen shade drives moss on north slopes across much of the city. Schedule brava shake tile service in Kenmore when cracked units, slipped courses, or valley stains show up—the National Weather Service Seattle office tracks Puget Sound wind and rain that drive many Kenmore composite tile calls. For curved barrel profiles, see Spanish Brava S-Tile instead.

1

Cracked, buckled, or tight-spaced shake courses

Tight installs leave little room for thermal movement and can buckle tiles or risk manufacturer coverage voids. We check keyway gaps (~3/16″ minimum; ~3/8″ preferred for look and movement) and replace damaged units without mixing Spanish barrel profiles into shake layouts. We confirm shake profile (not Spanish barrel) and King County wind exposure during Kenmore inspections.

2

Leaks at eaves, valleys, or penetrations

In Kenmore and King County rain, ice-and-water at eaves, valleys, and penetrations does the real waterproofing work; synthetic underlayment covers the field. Stains under the eaves usually mean the underlayment path failed—not that “Brava soaked through.” We photo-trace moisture before quoting. Estimates for Kenmore list color lot, underlayment, and ridge details before you approve.

3

Repair vs. full Brava shake tear-off

Brava shake is not installed over existing shingles—reroofs require tear-off. We use photos to decide isolated tile work vs. deck and underlayment replacement, then write the scope. Call (425) 758-9982 or request a free inspection when appropriate.

Brava shake tile installation with ridge board staging on site in Kenmore
Brava shake composite roof with skylights overlooking landscaped yard in Kenmore
Brava shake roof above a furnished deck in Kenmore
Brava shake composite tiles during installation with staging brackets in Kenmore
Brava shake roof on board-and-batten siding home with manicured hedge in Kenmore

Brava shake services in Kenmore

From single-tile swaps to hip caps and full cedar-style composite reroofs, these are Brava shake scopes we quote for homeowners in Kenmore and King County.

Composite shake repair

replace cracked or wind-damaged cedar-style units in Kenmore

Hip and ridge details

reset caps and closure pieces on shake profiles

Underlayment at valleys

ice-and-water and metal valleys under composite shake

Full cedar-style reroofs

tear-off and reinstall per manufacturer spec

Color and lot matching

source current Brava shake blends when possible

Profile verification

distinguish shake from Spanish S-Tile before ordering

Storm documentation

photo reports for insurance when applicable

Skylight and penetration flashing

integrated flashing at curbs and vent boxes

For non-urgent inspections or planned work, see roof inspection & estimate or contact us to schedule at a time that works for you.

Repair vs. full Brava shake reroof in Kenmore

Construction Elite LLC provides brava shake tile work in Kenmore and King County for cracked composite shakes, hip and ridge resets, and underlayment repairs at valleys. We photo-document the field when safe, confirm shake vs barrel profile before ordering, and deliver a written estimate before work begins. Verify our Washington contractor license through the WA Department of Labor & Industries license lookup or explore our Construction Elite LLC homepage. For Mediterranean barrel roofs in Kenmore, compare Spanish Brava S-Tile.

We repair when the composite field still has service life and damage is localized—a cracked course, a slipped hip unit, or a valley leak on Kenmore homes. When underlayment has failed across slopes or color lots cannot be matched, we explain a full composite shake reroof with photos—not pressure to sign the same day. On qualifying brava shake tile work in Kenmore, we document 5-year labor and eligible 30-year material warranty terms on your written estimate.

Brava shake composite tile roof with cedar-style texture on a luxury home patio in Kenmore

How our Brava shake process works in Kenmore

Photo inspect spacing, underlayment, and deck

We confirm Brava shake (not Spanish barrel), measure keyway gaps, check ice-and-water at eaves/valleys/penetrations, and decide repair vs. tear-off with photos—not driveway guesses.

Written shake scope before tear-off

Estimate lists shake color/lot needs, tear-off, synthetic underlayment and ice-and-water areas, fastener type, ridge/felt details, slope notes, and timeline. You approve before material hits the roof.

Install per shake guidance, then verify drainage

Material staged above 32°F when required; ring-shank fastening into deck; keyway spacing held; wet-tile walking minimized. Cleanup and warranty paperwork on qualifying 5-year labor / 30-year material work.

Warranties on Brava shake work in Kenmore

Written warranty terms on qualifying labor and materials for Brava shake projects in Kenmore are explained on your estimate before you approve. We note manufacturer coverage on composite units and workmanship on ridge, valley, and flashing details.

5

Year labor warranty

30

Year material warranty

FAQ · Contact us for terms on your project.

Warranty: up to 30 years on materials and 5-year labor coverage on qualifying work

Why homeowners choose Construction Elite LLC

  • Free inspections & written estimates — clear scope before you approve work
  • Master Craftsman certified crew — repairs to manufacturer standards
  • Licensed and insured in Washington
  • Serving Greater Seattle since 2021 — King, Snohomish, and Pierce Counties
  • Written estimates before permanent repair or replacement begins
Construction Elite LLC leadership on a roofing project in Kenmore

5-Star Rated on Google

Homeowners in Kenmore and King County rate us for clean composite shake installs, careful profile matching, and clear written estimates.

Brava shake projects in Kenmore

Recent cedar-style composite work from our licensed crew serving Kenmore and King County—photo-documented scopes you can review before approving work.

Brava shake service area near Kenmore

We also serve homeowners in these nearby communities:

Kenmore Brava shake FAQ

How much does brava shake tile cost in Kenmore?
Cost depends on roof size, pitch, color lot availability, and how many units or valleys need work. We provide a free inspection when appropriate and a written estimate with line items before you approve.
Can you match my existing shake-profile tiles in Kenmore?
We source compatible Brava shake blends when manufacturers still produce the lot. Exact color blends can vary by age and sun exposure on Kenmore homes—we explain matching limits on your estimate.
Is Brava shake the same as Spanish S-Tile in Kenmore?
No. Shake profiles mimic hand-split cedar; Spanish S-Tile is a curved barrel profile. See Spanish Brava S-Tile if your Kenmore roof uses barrels.
Do you repair wind-damaged composite shakes in Kenmore?
Yes. Cracked units, slipped courses, and exposed fasteners after Puget Sound windstorms are common Kenmore scopes. We replace damaged units and check neighboring courses.
When should I reroof instead of repairing shakes in Kenmore?
A full reroof often makes sense when underlayment has failed across slopes, color lots cannot be matched, or repair costs approach a large share of a new system in King County.
Do you handle valleys, ridges, and skylight flashing in Kenmore?
Yes. Valleys, hips, ridges, and penetrations are high-flow areas in King County rain. We detail underlayment and metal valleys under composite shake to manufacturer specs.
Is Construction Elite LLC licensed in Kenmore?
Yes. We are licensed and insured in Washington. Verify our contractor registration through the WA Department of Labor & Industries license lookup before you schedule.
What warranties apply to brava shake tile in Kenmore?
On qualifying work we offer a 5-year labor warranty and a 30-year material warranty on eligible products. Terms are explained on your written estimate before you approve.

Related roofing services

Beyond Brava shake work in Kenmore, see emergency roof repair, roof inspection, and residential roof repair—or start from our homepage.

Ready for a Brava shake inspection in Kenmore?

Tell us about cracked composite shakes, slipped courses, or valley stains on your Kenmore roof. We photo-document the field and flashing—then provide a written quote with no obligation.

Construction Elite LLC · 4405 153rd Pl SE, Bothell, WA 98012

Scroll to Top